
Short answer: Cast iron is an iron-carbon-silicon alloy cast into shapes; gray iron damps vibration, ductile iron adds strength and impact resistance, white iron resists wear, and CGI bridges strength and stiffness – the supply is on our Cast Iron Supplier page and the process in our Metal Casting Guide.
At a Glance

What Makes Cast Iron Different
Cast irons are iron-carbon-silicon alloys with carbon above about 2 percent, cast into near-net shapes; the graphite form controls behaviour. The process basis is in our Metal Casting Guide and the comparison with wrought routes in our Cast vs Forged Guide.
The Five Main Types
Gray, ductile, malleable, white and compacted graphite iron each suit different duty; see our Gray Iron Guide, Ductile Iron Guide, Malleable Iron Guide, White Iron Guide and CGI Guide.
Reading Cast Iron Grades
EN-GJL / EN-GJS and ASTM A48 / A536 numbers state tensile strength and elongation; the general method is in our Choose a Supplier Guide.
Selecting by Property
Choose by damping, strength, wear or stiffness; heat treatment can upgrade properties per our Metal Heat Treatment Guide and the ADI Guide.
Where Cast Iron Is Used
Typical duty spans construction, mining, agriculture and oil and gas.
Quality and Certification
Require a foundry test certificate and inspection per our Quality Inspection Guide; avoid defects covered in our Casting Defects Guide.
Get a Quote
Tell HXSCO your requirements and we will respond with a competitive quote and lead time.
Frequently Asked Questions
Gray for vibration damping, ductile for strength and shock.
500 MPa tensile strength, 7 percent elongation.
With care; see our metal welding guide.
White iron, due to its carbide structure.
Yes – see our cast iron supplier page.
Get a Cast Iron Quote
HXSCO supplies all cast iron types with foundry certificates and machining. Send your grade and drawing for a competitive quote.
