
Short answer: Ductile iron is cast iron treated so its graphite forms spheres rather than flakes, giving steel-like strength with good elongation; grades are set out in this guide and supply is on our Ductile Iron Supplier page.
At a Glance

How Nodular Graphite Forms
A magnesium treatment spheroidises the graphite, removing the stress-concentrating flakes of gray iron; the family context is in our Cast Iron Guide.
EN-GJS and ASTM A536 Grades
Grades pair tensile strength with elongation: higher strength means lower ductility; specification method is in our Choose a Supplier Guide.
Ductile vs Gray Iron
Ductile wins on impact and strength, gray on damping and cost; see our Gray Iron Guide.
Heat Treatment and ADI
Austempering yields austempered ductile iron with high strength and toughness; see our ADI Guide and Metal Heat Treatment Guide.
Where Ductile Iron Is Used
Water pipe, fittings, gears, crankshafts and wind hubs; the infrastructure view is in our Construction Guide and the casting basis in our Metal Casting Guide.
Quality and Certification
Nodularity counts and mechanical tests are documented per our Quality Inspection Guide; watch for defects in our Casting Defects Guide.
Get a Quote
Tell HXSCO your requirements and we will respond with a competitive quote and lead time.
Frequently Asked Questions
Spheroidal graphite iron, same as ductile iron.
500 MPa tensile, 7 percent elongation.
Often, where castability and cost matter.
EN-GJS-500-7 is widely used.
Yes – see our ductile iron supplier page.
Get a Ductile Iron Quote
HXSCO supplies EN-GJS and ASTM A536 ductile iron pipe, fittings and castings with foundry certificates. Send your drawing for a quote.
