Cold-Chamber Die Casting Guide: Process, Alloys and Applications

Cold-Chamber Die Casting Guide: Process, Alloys and Applications

Short answer: Cold-chamber die casting ladles molten metal into a separate injection chamber each cycle, allowing high-melting alloys such as aluminum and copper to be cast into accurate parts; the alternative is explained in our Hot-Chamber Guide and the family in our Die Casting Guide.

At a Glance

Cold-Chamber Die Casting Guide: Process, Alloys and Applications chart
Figure 1 – Cold-Chamber Die Casting Guide: Process, Alloys and Applications overview.

How the Cold-Chamber Works

Molten metal is held in a furnace, ladled into the shot chamber, then a piston injects it into the die at high pressure; the process context is in our Die Casting Guide.

Alloys for Cold-Chamber

Aluminum A380 and ADC12, copper and brass, and some magnesium grades are typical; see our Alloys Guide and Aluminum Guide.

Advantages

High-melting alloys, good mechanical properties and thin-wall capability suit structural and lightweight parts; compare routes in our Die vs Sand Casting Guide.

Cycle and Cost Considerations

Ladling each shot makes the cycle slower than hot chamber, but tooling life and part value often justify it; planning is in our Price Quotation Guide.

Typical Applications

Automotive housings, wheels, 3C shells and pump bodies; the duty context is in our Automotive Guide.

Quality and Finishing

Porosity control is covered in our Defects Guide, inspection in our Inspection Guide and finishing in our Finishing Guide.

Get a Quote

Tell HXSCO your requirements and we will respond with a competitive quote and lead time.

Frequently Asked Questions

What metals suit cold chamber?

Aluminum, copper and some magnesium alloys.

Why not use hot chamber for aluminum?

Aluminum would attack the immersed mechanism and melts too hot.

Is cold chamber slower?

Yes, because each shot is ladled separately.

What parts are common?

Auto housings, wheels and 3C shells.

Do you supply cold-chamber castings?

Yes – see our die casting supplier page.

Get a Cold-Chamber Quote

HXSCO supplies aluminum and copper cold-chamber die castings with tooling, machining and certificates. Send your drawing and volume for a quote.

Request a Quote