Short answer: HXSCO supplies titanium wire in commercially pure Grade 1 and 2 plus Grade 5 (Ti-6Al-4V) and Grade 7, drawn to precise diameter, spooled or coiled, and shipped with mill certificate and diameter check for welding, medical, marine and spring applications.
At a Glance
Our Titanium Wire Range
We draw wire beside our Titanium Supplier, Titanium Bar Supplier and Titanium Sheet Supplier lines; see Titanium Grade 2 vs 5 for selection guidance.
Diameter and Temper
Wire is drawn from 0.2 mm to 6.0 mm with bright, oxide-free surface. Diameter and roundness are verified per Metal Tolerances Fits Guide; surface finish per Surface Roughness Ra Guide. Chemistry is documented by Mill Test Certificate Guide.
Spooling and Packing
We spool on plastic or steel reels for automatic welding and coiling for bulk. Grade 5 wire is stress-relieved where specified. Every spool ships with a traceable heat number and diameter report.
Applications
Grade 2 and 23 wire feed TIG and MIG welding and medical meshes; Grade 5 serves aerospace and spring wire; Grade 7 is used in aggressive chemical service. Wire drawing is detailed in our Metal Wire Drawing Guide.
Get a Quote
Tell HXSCO your requirements and we will respond with a competitive quote and lead time.
Frequently Asked Questions
Commercially pure Grade 1 and 2, Grade 5 (Ti-6Al-4V), Grade 7 and Grade 23 ELI.
From 0.2 mm to 6.0 mm drawn, bright and oxide-free.
Yes — Grade 23 (Ti-6Al-4V ELI) for implant and medical use.
Spooled on plastic or steel reels, or coiled for bulk, each with heat number.
Every spool ships with mill test report and diameter check.
Source Titanium Wire from HXSCO
HXSCO supplies Grade 1, 2, 5, 7 and 23 titanium wire drawn to your diameter and spooled to spec. Send your grade, gauge and packing for a quote.