Welded Tube Guide: ERW & Laser-Welded Steel Tube and Pipe Explained

Welded tube is made by roll-forming a strip or coil into a round, square or...

Flame Hardening Guide: Surface Hardening of Steel for Wear Resistance

Flame hardening heats a steel surface with an oxy-fuel torch and quenches it in place,...

Electropolishing Guide: Bright, Passive & Ultra-Clean Metal Finishing

Electropolishing is the electrochemical reverse of plating: the part is the anode in a phosphoric/sulphuric...

Electroless Nickel Guide: EN Plating for Uniform, Hard, Corrosion-Resistant Coatings

Electroless nickel (EN) deposits nickel-phosphorus from an autocatalytic bath with no electric current, so the...

Die Casting Guide: Aluminium & Zinc High-Pressure Die Casting

Die casting forces molten metal into a reusable steel die under high pressure, producing dense,...

CNC Milling Guide: 3-, 4- & 5-Axis Machining for Complex Parts

CNC milling spins a multi-flute cutter against a fixed or indexed workpiece to remove material...

Cast Iron Guide: Grey, Ductile (SG) & Malleable Iron Grades & Uses

Cast iron is iron-carbon-silicon with 2–4 % carbon, poured into moulds for parts where stiffness,...

Black Oxide Guide: Blackening Finish for Steel, Stainless & Copper

Black oxide (blackening) converts the surface of steel, stainless or copper into a thin, uniform...

Inconel Supplier – Nickel-Chromium Superalloy (N06625, N07718, N07773) from Shanghai

HXSCO supplies Inconel — a family of nickel-chromium superalloys that keep high strength and oxidation/corrosion...

Beryllium Copper Supplier – CuBe Alloy (C17200, C17510, C17500) from Shanghai

HXSCO supplies beryllium copper (CuBe) — a copper alloy with 0.5–2 % beryllium that, after...