Rhenium Supplier – Rhenium (Re) Rod, Sheet, Wire & Pellets from Shanghai

HXSCO supplies rhenium (Re) — one of the rarest, highest-melting (3186 °C) and most creep-resistant...

Sand Casting Guide: Green Sand, No-Bake & Process Defects Explained

Sand casting pours molten metal into a sand mould that is destroyed after each pour,...

Ring Rolling Guide: Seamless Rolled Rings for Bearings & Flanges

Ring rolling deforms a heated pierced blank between a driven main roll and a pressure...

PVD Coating Guide: Sputtering, Evaporation & Hard Coating

Physical Vapour Deposition (PVD) deposits a thin, hard, wear- and corrosion-resistant coating in a high-vacuum...

Plasma (Ion) Nitriding Guide: Low-Temperature Case Hardening

Plasma (ion) nitriding hardens a steel surface in a low-pressure glow discharge: ionized nitrogen bombards...

Permanent Mold Casting Guide: Gravity Die Casting vs Die Casting

Permanent mold casting pours molten metal by gravity into a reusable steel (or iron) mould,...

Laser Cladding Guide: Additive Hardfacing & Repair

Laser cladding fuses a powder or wire feed into a thin, metallurgically bonded, low-dilution layer...

Cryogenic Treatment Guide: Deep-Cooling for Stability & Wear

Cryogenic treatment holds a quenched steel (or other alloy) at around -196 °C (liquid nitrogen)...

Cold Drawing Guide: Tube, Bar & Wire Drawing for Bright Dimensional Stock

Cold drawing pulls a rod, bar or tube through a hardened die (and, for tubes,...

Indium Supplier – Indium (In) Ingot, Wire & Solder from Shanghai

HXSCO supplies indium (In) — a soft, low-melting, highly ductile post-transition metal prized for its...