Die Casting Supplier – Aluminum, Zinc, Magnesium and Copper Die Castings

Die Casting Supplier – Aluminum, Zinc, Magnesium and Copper Die Castings

Short answer: HXSCO is a die casting supplier for aluminum, zinc, magnesium and copper alloys, offering hot-chamber and cold-chamber high-pressure die casting with tooling, machining and finishing – backed by our Metal Casting Guide y Die Casting Guide.

At a Glance

Die Casting Supplier – Aluminum, Zinc, Magnesium and Copper Die Castings chart
Figure 1 – Die Casting Supplier – Aluminum, Zinc, Magnesium and Copper Die Castings overview.

Our Die Casting Capability

We produce high-pressure die castings across the four main alloy families. The process basis is in our Metal Casting Guide and the process comparison in our Die Casting Guide.

Alloy family Process Typical use
Zinc Zamak / ZA Hot chamber Housings, hardware
Aluminum A380 / ADC12 Cold chamber Auto, 3C shells
Magnesium AZ91D Cold chamber Light weight parts
Copper / Brass Cold chamber Valves, fittings

Hot-Chamber and Cold-Chamber

Hot-chamber suits low-melting zinc and magnesium for fast cycles; cold-chamber handles higher-melting aluminum and copper. See our Hot-Chamber Guide y Cold-Chamber Guide.

Alloys and Grades

We work to ASTM and EN die-cast grades; alloy selection is explained in our Die Casting Alloys Guide, with base material notes in our Aluminum Guide y Zinc Guide.

Tooling and Mold Design

In-house tooling covers parting lines, gating, venting and cooling; design principles are in our Mold Design Guide and the route comparison in our Die vs Sand Casting Guide.

Machining and Finishing

Secondary machining and surface finishing are available; options are covered in our Finishing Guide y Metal Surface Treatment Guide.

Quality and Certification

Each lot ships with a foundry test certificate and inspection per our Quality Inspection Guide y Mill Test Certificate Guide; common issues are in our Defects Guide.

Ordering and Lead Time

State alloy, part drawing, tolerance and annual volume; plan with our MOQ and Lead Time Guide and price with our Price Quotation Guide.

Get a Quote

Tell HXSCO your requirements and we will respond with a competitive quote and lead time.

Preguntas frecuentes

Which alloys can you die cast?

Aluminum, zinc, magnesium and copper alloys.

Do you make the tooling in house?

Yes – die design and manufacture are supported.

Can you machine and finish parts?

Yes – machining, deburring and surface finishing available.

What is the typical MOQ?

Tooling suits medium to high volumes; ask for your part.

Are certificates provided?

Yes – foundry test certificates per lot, third-party on request.

Source Die Castings with HXSCO

HXSCO supplies aluminum, zinc, magnesium and copper die castings with tooling, machining, finishing and foundry certificates. Send your drawing and annual volume for a quote.

Request a Quote