Short answer: HXSCO supplies pre-painted steel — PPGI (pre-painted galvanised) and PPGL (pre-painted galvalume/aluzinc) — as coil, sheet and strip with a factory-applied, oven-cured organic coating that delivers colour, corrosion protection and formability in one ready-to-fabricate product.
At a Glance
PPGI vs PPGL
PPGI is painted hot-dip galvanised steel; PPGL is painted galvalume (55% Al-Zn) base, which gives better cut-edge protection in aggressive atmospheres. Both are supplied from our Galvanized Steel Supplier und Steel Coil Supplier lines and are the coated cousins of plain stock described in Galvalume Vs Galvanized Steel; coil equivalents are also available as Aluminum Coil Supplier.
Coating, Process & Quality
After cleaning per Metal Degreasing Guide the strip is chemically treated, primed and top-coated (polyester, silicone-modified polyester, HDP or PVDF) and oven-cured — a process distinct from post-fabrication Anodizing Vs Powder Coating and from Hot Dip Galvanizing Process. We verify film build with Metal Coating Thickness Guide and certificate per Mill Test Certificate Guide; the base follows our Metal Surface Treatment Guide.
Applications & Supply
Uses span building Metal Cladding Facades, Metal Roofing Guide, appliances, door skins, ceiling grids and automotive panels. We supply matched colour, coating system and substrate, advise on formability and corrosion care via How To Prevent Metal Rust und Metal Corrosion Inhibitor Guide, and inspect with Metal Ndt Guide before export packing.
Get a Quote
Tell HXSCO your requirements and we will respond with a competitive quote and lead time.
Häufig gestellte Fragen
PPGI is pre-painted hot-dip galvanised steel; PPGL is pre-painted galvalume (55% Al-Zn) base, which protects cut edges better in aggressive or coastal atmospheres.
Polyester (PE), silicone-modified polyester (SMP), high-durability polyester (HDP) and PVDF — chosen by colour-retention, chalk-resistance and environment needs.
Total coating is typically 15-25 microns primer plus 15-20 microns topcoat (PE), up to ~25+25 for PVDF; we verify with a DFT gauge per our coating-thickness guide.
Yes if the coating and substrate are matched to the bend radius; we advise the right grade, temper and minimum bend radius for your forming process.
HXSCO supplies PPGI/PPGL in standard and custom colours and coating systems, with film-build and adhesion checks and mill documentation on request.
Source Pre-Painted Steel from HXSCO
HXSCO supplies PPGI and PPGL coil, sheet and strip in standard and custom colours with DFT and adhesion checks and mill certificates. Send your coating system, gauge and quantity for a quote.