Short answer: HXSCO supplies aluminum coil in 1050/1060, 3003/3105, 5052/5754 and 6061/6082 from 0.2 to 8 mm, mill-finish or PE/PVDF colour-coated, slit to width and packed on wooden pallets with EN 10204 certificates.
At a Glance
Aluminum Coil We Stock
Coil is the most economical way to buy aluminum for continuous forming, roll-forming and stamping. It feeds the same programmes as our Aluminum Supplier sheet and Aluminum Extrusion Supplier profiles, and pairs with Steel Coil Supplier for mixed-material projects.
- 1050 / 1060 (H14–H24) — 0.2–3.0 mm, 99.5% pure: reflectors, lighting, signage, foil stock.
- 3003 / 3105 (H14–H24) — 0.3–4.0 mm: roofing, ducting, cladding, deep-drawn parts.
- 5052 / 5754 (H32–H34) — 0.5–6.0 mm: marine, fuel tanks, transport panels.
- 6061 / 6082 (T6) — 1.0–8.0 mm: structural plate stock and machining blanks.
- Colour-coated (PE / PVDF) — 0.3–1.5 mm, 20+ RAL colours for facade and ACP.
Alloy & Temper Selection
Choose 3003 when you need formability and corrosion resistance at low cost, 5052 when you need strength plus salt-water resistance, and 6061-T6 when the part must carry load — the comparisons are in 3003 Vs 5052 Aluminum, 1060 Vs 3003 Aluminum und 6082 Vs 6061 Aluminum. Temper (H14, H24, H32, T6) sets the strength/formability trade-off; see Aluminum 6061 Properties und Aluminum 5052 Properties for full data, and Cold Rolling Vs Hot Rolling for how the coil was produced.
Slitting, Coating & Quality
We slit to width from 20 mm up, cut to length, and supply mill-finish, stucco-embossed, anodized or PE/PVDF colour-coated surfaces per Anodizing Vs Powder Coating und Metal Surface Treatment Guide. Coils ship with eye-to-sky or eye-to-wall packing on wooden pallets, with an EN 10204 certificate per our Mill Test Certificate Guide. Typical lead time is 12–20 days depending on alloy and coating.
Get a Quote
Tell HXSCO your requirements and we will respond with a competitive quote and lead time.
Häufig gestellte Fragen
HXSCO supplies 1050, 1060, 3003, 3105, 5052, 5754, 6061 and 6082 aluminum coil in tempers from H14 to T6, plus PE/PVDF colour-coated coil.
Thickness runs 0.2–8.0 mm depending on alloy, with slitting to any width from 20 mm up to 1500 mm standard.
3003 or 3105 in H14–H24 is the standard roofing and cladding choice; 5052 is used where salt exposure or higher strength is required.
Yes. HXSCO supplies PE and PVDF colour-coated aluminum coil in 0.3–1.5 mm with 20+ RAL colours and 10–20 year coating warranties.
Order Aluminum Coil from HXSCO
HXSCO supplies 1050, 3003, 5052 and 6061 aluminum coil, mill-finish or colour-coated, slit to your width. Send alloy, thickness and tonnage for a quote.