Short answer: HXSCO supplies pure nickel (Nickel 200 and low-carbon Nickel 201) as strip, foil, rod, bar, wire, plate and tube — the go-to metal for caustic, high-temperature and magnetic-permeability service where corrosion resistance and ductility matter more than strength.
At a Glance
What Pure Nickel Delivers
Nickel 200 (99.6% Ni) and Nickel 201 (low-carbon, <0.02% C) combine excellent resistance to caustic alkalis, retained toughness down to cryogenic temperatures and high thermal and electrical conductivity. They sit alongside our Nickel Alloy Supplier, Copper Supplier y Stainless Steel Supplier lines, and they are far more noble than steel in the Galvanic Series Guide, so coupling needs care in Seawater Corrosion Guide.
Grades, Forms & Properties
Nickel 201 is preferred above ~315 C because its lower carbon avoids graphite precipitation and embrittlement; both grades are readily formed and welded. We stock and cut strip, foil, rod, bar, wire, plate and tube, and certificate chemistry and mechanicals per Mill Test Certificate Guide — a useful cross-reference with Grados de acero inoxidable explicados, Aluminum Supplier y Brass Supplier. Surface prep follows our Metal Surface Treatment Guide.
Applications & How We Supply
Typical uses are caustic evaporators and soda-ash plant, food and synthetic-fibre equipment, battery components, electronics and magnetic shields. We protect finished nickel with inhibitors from Metal Corrosion Inhibitor Guide, pack for export and inspect with Metal Ndt Guide; tell us your How To Prevent Metal Rust and cleanliness requirements when you enquire.
Get a Quote
Tell HXSCO your requirements and we will respond with a competitive quote and lead time.
Preguntas frecuentes
Both are 99.6% pure nickel; Nickel 201 has very low carbon (<0.02%) so it avoids graphite embrittlement above ~315 C, while Nickel 200 is used at lower temperatures and for general corrosion service.
Yes — it resists caustic alkalis, many neutral and reducing salts and dry gases, though it is attacked by oxidising acids; it is far more noble than steel, so galvanic coupling needs insulation.
Strip, foil, rod, bar, wire, plate and tube in Nickel 200 / 201, cut and finished to size with mill certificates on request.
Yes — it welds well with matching nickel filler using TIG/MIG and clean practice; low-carbon 201 reduces carbide-related issues in the heat-affected zone.
HXSCO supplies nickel with chemistry and mechanical mill documentation per your specification, inspected and packed for export.
Source Pure Nickel from HXSCO
HXSCO supplies Nickel 200 / 201 strip, foil, rod, bar, wire, plate and tube cut to size with mill certificates. Send your grade, form, temper and quantity for a quote.