Titanium vs Magnesium: Lightweight Metals Compared

Titanium (4.5 g/cm³) is denser but far stronger and naturally corrosion-proof; magnesium (1.7 g/cm³) is...

Tin Supplier – Ingots, Solder & Alloys from Shanghai

HXSCO supplies tin as SHG ingot (99.99%), soft and lead-free solder wire/bar, tin bronze and...

Stainless Steel 316 Properties: Molybdenum-Grade Guide

316 is an 18-10 austenitic stainless with 2–3% molybdenum, giving it markedly better pitting and...

S355 vs S275 Steel: EN Structural Grades Compared

S355 and S275 are European structural carbon steels; S355 has a higher minimum yield (355...

Magnesium Supplier – AZ31B, AZ91D & Alloys from Shanghai

HXSCO supplies magnesium as AZ31B sheet/plate, AZ91D die-casting alloy, high-strength WE43/ZK60, pure Mg ingot and...

Hastelloy Guide: C-276, C-22 & Corrosion-Resistant Alloys

Hastelloy is a family of nickel-chromium-molybdenum superalloys built for the most aggressive chemical service —...

Galvanic Corrosion Guide: Prevent Dissimilar-Metal Attack

Galvanic corrosion happens when two dissimilar metals touch in an electrolyte: the more anodic (active)...

Corten Steel Guide: Weathering Steel Properties & Use

Corten (weathering steel) is a group of low-alloy steels — S355J2W, S355J2WP, ASTM A588 —...

Brass Grades Guide: C26000, C36000 & More

Brass is a copper-zinc alloy; common grades run from 70/30 cartridge brass (C26000) through architectural...

2024 vs 7075 Aluminum: Aerospace Alloys Compared

2024 (Al-Cu) and 7075 (Al-Zn-Mg-Cu) are the two workhorse heat-treatable aerospace aluminums. 2024 has better...