Zirconium Supplier – Zr 702/705 Bar, Sheet & Tube from Shanghai

HXSCO supplies zirconium Zr 702 and 705 bar, sheet and tube — a corrosion-resistant refractory...

Molybdenum Supplier – Rod, Plate, Wire & Mo-Cu Alloys from Shanghai

HXSCO supplies molybdenum rod, plate, wire and TZM alloy plus Mo-Cu composites — a refractory...

Thermal Shock Resistance of Metals: CTE, Conductivity & Design

Thermal shock is the cracking or spalling of a metal when a rapid temperature change...

Springback Guide: Predicting & Controlling Elastic Recovery in Forming

Springback is the elastic rebound of a formed part when the bending load is released;...

Porosity Guide: Gas & Shrinkage Voids in Castings & Welds

Porosity is the network of gas and shrinkage voids trapped inside castings and welds; it...

Corrosion Monitoring Guide: Coupons, Probes & EIS

Corrosion monitoring tracks metal loss in service with weight-loss coupons, linear-polarisation resistance and electrochemical impedance...

Erosion-Corrosion Guide: Flow, Particles & Prevention

Erosion-corrosion is the accelerated loss of metal where a corrosive fluid flow mechanically strips the...

Copper Corrosion: Forms, Selective Leaching & Protection

Copper resists atmosphere and water well but suffers pitting under deposits or chlorides, erosion-corrosion at...

Coating & Paint Defects on Metal: Causes & Prevention

Coating defects on metal — pinholing, cissing, peeling, orange peel and rust bleed — almost...

Aluminium Corrosion: Types, Pitting & Protection

Aluminium forms a self-healing oxide film that gives good general corrosion resistance, but it is...