Aluminum Die Casting Supplier – A380, ADC12, AlSi Alloy Castings

Aluminum Die Casting Supplier – A380, ADC12, AlSi Alloy Castings

Short answer: HXSCO supplies aluminum die castings in A380, ADC12, A356 and AlSi grades using cold-chamber high-pressure casting with tooling, machining and finishing – see our Die Casting Guide and the base material in our Aluminum Guide.

At a Glance

Aluminum Die Casting Supplier – A380, ADC12, AlSi Alloy Castings chart
Figure 1 – Aluminum Die Casting Supplier – A380, ADC12, AlSi Alloy Castings overview.

Our Aluminum Die Casting Range

We cast the common Al-Si-Cu and Al-Si-Mg grades for housings, covers, shells and structural parts; the grade logic is in our Alloys Guide and the base metal in our Aluminum Guide.

Sınıf Family Typical use
A380 / ADC10 Al-Si-Cu General castings
ADC12 / A383 Al-Si-Cu 3C and auto shells
A356 Al-Si-Mg Wheels, structural
AlSi9Cu3 Al-Si-Cu Housings, covers

Cold-Chamber Process

Aluminum is cast by the cold-chamber route because of its higher melting point; the cycle is detailed in our Cold-Chamber Guide and versus the hot chamber in our Hot-Chamber Guide.

Tooling and Wall Thickness

Thin-wall capability depends on gating and cooling; design rules are in our Mold Design Guide.

Finishing Options

Anodizing, powder coating and machining upgrade appearance and function; see our Finishing Guide ve Surface Treatment Guide.

Quality and Certification

Properties and porosity are checked per our Quality Inspection Guide and documented per our Mill Test Certificate Guide; watch for issues in our Defects Guide.

Ordering and Lead Time

State grade, drawing, tolerance and volume; plan with our MOQ and Lead Time Guide.

Get a Quote

Tell HXSCO your requirements and we will respond with a competitive quote and lead time.

Sıkça Sorulan Sorular

Which aluminum grade should I use?

ADC12 / A383 for general and 3C parts, A356 for structural and wheels.

Do you use hot or cold chamber?

Cold chamber, because aluminum melts at a higher temperature.

Can you anodize die castings?

Yes – selected grades anodize well; ask about your grade.

Do you supply machined parts?

Yes – machining and finishing are available.

Are certificates included?

Yes – foundry test certificates per lot.

Get an Aluminum Die Casting Quote

HXSCO supplies A380, ADC12, A356 and AlSi aluminum die castings with tooling, machining, finishing and certificates. Send your drawing and volume for a quote.

Request a Quote