Austempered Ductile Iron (ADI) Guide: Grades, Heat Treatment and Uses

Austempered Ductile Iron (ADI) Guide: Grades, Heat Treatment and Uses

Short answer: Austempered ductile iron is ductile iron heat-treated to a bainitic matrix, delivering high strength with useful toughness and wear resistance at lower cost than forged steel – the process is in our Metal Heat Treatment Guide and the base material in our Ductile Iron Guide.

At a Glance

Austempered Ductile Iron (ADI) Guide: Grades, Heat Treatment and Uses chart
Figure 1 – Austempered Ductile Iron (ADI) Guide: Grades, Heat Treatment and Uses overview.

What Austempering Does

The part is austenitised then quenched into a salt bath and held to form bainite, avoiding brittle martensite; the general cycle is in our Metal Heat Treatment Guide.

ADI Grades and Properties

Grades state minimum tensile strength from about 900 to 1400 MPa, traded against elongation; the base ductile grades are in our Ductile Iron Guide.

ADI vs Forged Steel

ADI offers near-forged strength with better castability and damping; the route comparison is in our Cast vs Forged Guide.

Where ADI Is Used

Gears, crankshafts, suspension parts and wear components; the performance context is in our Cast Iron vs Steel Guide and duty in our Mining Guide.

Process Control

Bath temperature and hold time control the bainite; consistency is checked per our Quality Inspection Guide.

Ordering Notes

Specify ADI grade, base iron and drawing; price with our Price Quotation Guide.

Get a Quote

Tell HXSCO your requirements and we will respond with a competitive quote and lead time.

Perguntas frequentes

What is ADI?

Austempered ductile iron, a bainitic high-strength iron.

How strong is ADI?

Grades range from about 900 to 1400 MPa tensile.

Does ADI replace steel?

Often, for gears and wear parts.

Is ADI machinable?

Yes, but usually machined before austempering.

Do you supply ADI parts?

Yes – to grade and drawing.

Get an ADI Quote

HXSCO supplies austempered ductile iron castings to ADI grades with heat-treatment and inspection certificates. Send your drawing for a quote.

Request a Quote