
Short answer: HXSCO supplies the full cast iron family – gray, ductile (nodular), malleable, white and compacted graphite iron – as castings, bars and custom shapes, backed by the casting basis in our Metal Casting Guide and the selection logic in our Cast Iron Guide.
At a Glance

Our Cast Iron Range
We supply every major cast iron family for machinery bases, pipe fittings, gears, wear parts and engine components. The graphite structure behind each type is explained in our Cast Iron Guide and the process basis in our Metal Casting Guide.
| Jenis | Graphite form | Primary use |
|---|---|---|
| Gray iron | Flakes | Housings, bases |
| Ductile iron | Spheroids | Pipe, gears |
| Malleable iron | Temper carbon | Fittings, brackets |
| White iron | Carbides | Wear parts |
| CGI | Compacted | Engine blocks |
Grades and Standards
Castings are supplied to EN-GJL, EN-GJS, EN-GJMW, ASTM A48, A536 and related standards; grade selection is covered in our Gray Iron Guide dan Ductile Iron Guide.
Castings, Bars and Custom Shapes
We deliver as-cast blanks, machined castings, bar and plate, and near-net shapes; the route options are compared in our Cast vs Forged Guide and the finishing in our Metal Surface Treatment Guide.
Heat Treatment and Machining
Annaealing, normalising, quenching and austempering tailor properties; see our Metal Heat Treatment Guide dan ADI Guide. Machining notes are in our Metal Welding Guide.
Quality and Certification
Each lot ships with a foundry test certificate and, where required, third-party inspection per our Quality Inspection Guide dan Mill Test Certificate Guide. Common issues are covered in our Casting Defects Guide.
Ordering and Lead Time
State type, grade, part drawing and quantity; plan timing with our MOQ and Lead Time Guide and price with our Price Quotation Guide.
Get a Quote
Tell HXSCO your requirements and we will respond with a competitive quote and lead time.
Pertanyaan yang Sering Diajukan
Gray for damping and housings, ductile for strength and impact, white for wear.
Yes – as-cast, rough-machined and finish-machined parts.
Yes – near-net and to-drawing castings from patterns or CAD.
Yes – foundry test certificates per lot, third-party on request.
Yes – packed, marked and documented for export.
Source Cast Iron with HXSCO
HXSCO supplies gray, ductile, malleable, white and CGI cast iron with foundry certificates and machining. Send your drawing or grade for a quote.
