Cast Iron Supplier – Gray, Ductile, Malleable, White and CGI Iron

Cast Iron Supplier – Gray, Ductile, Malleable, White and CGI Iron

Short answer: HXSCO supplies the full cast iron family – gray, ductile (nodular), malleable, white and compacted graphite iron – as castings, bars and custom shapes, backed by the casting basis in our Metal Casting Guide and the selection logic in our Cast Iron Guide.

At a Glance

Cast Iron Supplier – Gray, Ductile, Malleable, White and CGI Iron chart
Figure 1 – Cast Iron Supplier – Gray, Ductile, Malleable, White and CGI Iron overview.

Our Cast Iron Range

We supply every major cast iron family for machinery bases, pipe fittings, gears, wear parts and engine components. The graphite structure behind each type is explained in our Cast Iron Guide and the process basis in our Metal Casting Guide.

Type Graphite form Primary use
Gray iron Flakes Housings, bases
Ductile iron Spheroids Pipe, gears
Malleable iron Temper carbon Fittings, brackets
White iron Carbides Wear parts
CGI Compacted Engine blocks

Grades and Standards

Castings are supplied to EN-GJL, EN-GJS, EN-GJMW, ASTM A48, A536 and related standards; grade selection is covered in our Gray Iron Guide en Ductile Iron Guide.

Castings, Bars and Custom Shapes

We deliver as-cast blanks, machined castings, bar and plate, and near-net shapes; the route options are compared in our Cast vs Forged Guide and the finishing in our Metal Surface Treatment Guide.

Heat Treatment and Machining

Annaealing, normalising, quenching and austempering tailor properties; see our Metal Heat Treatment Guide en ADI Guide. Machining notes are in our Metal Welding Guide.

Quality and Certification

Each lot ships with a foundry test certificate and, where required, third-party inspection per our Quality Inspection Guide en Mill Test Certificate Guide. Common issues are covered in our Casting Defects Guide.

Ordering and Lead Time

State type, grade, part drawing and quantity; plan timing with our MOQ and Lead Time Guide and price with our Price Quotation Guide.

Get a Quote

Tell HXSCO your requirements and we will respond with a competitive quote and lead time.

Veelgestelde vragen

Which cast iron should I use?

Gray for damping and housings, ductile for strength and impact, white for wear.

Do you supply machined castings?

Yes – as-cast, rough-machined and finish-machined parts.

Can you make custom shapes?

Yes – near-net and to-drawing castings from patterns or CAD.

Are certificates provided?

Yes – foundry test certificates per lot, third-party on request.

Do you export?

Yes – packed, marked and documented for export.

Source Cast Iron with HXSCO

HXSCO supplies gray, ductile, malleable, white and CGI cast iron with foundry certificates and machining. Send your drawing or grade for a quote.

Request a Quote

Dit bericht is gepost in Blog. Bookmark de link.