Short answer: Friction welding joins parts by rubbing them together under force until the interface plasticises from heat, then forging the softened surfaces into a solid-state bond with no filler, flux or melt — producing a clean, full-strength joint with minimal heat-affected zone. Spin friction welding joins round parts end-to-end, upset (linear) friction welding joins bars and non-round sections, and radial friction welding attaches collars or flanges to tube; all are favoured for dissimilar-metal joints and high-integrity shafts where fusion welding would dilute or crack.
At a Glance
Friction vs Other Welding
Friction welding compares with Metal Friction Stir Welding Guide, Metal Resistance Welding Guide y Metal Laser Welding Guide; relate to Metal Adhesive Bonding Guide.
Calidad
Joint and flash checked by Metal Ndt Guide, documented per Mill Test Certificate Guide. Relate to Metal Welding Positions Guide y Metal Heat Affected Zone Guide.
Supply & QA
Match alloys via Grados de acero inoxidable explicados; HXSCO supplies friction-weldable bar and tube.
Get a Quote
Tell HXSCO your requirements and we will respond with a competitive quote and lead time.
Preguntas frecuentes
Heat by rubbing + forging, no melt or filler.
Spin joins round ends; upset joins bars/non-round butts.
Both solid-state; friction is rotary/upset, FSW is stirred.
Yes — great for joining incompatible alloys.
HXSCO supplies bar and tube suited to friction welding.
Source Friction-Weldable Stock from HXSCO
HXSCO supplies steel, stainless and aluminium bar and tube suited to friction welding. Send your alloy and size for a quote.