Copper Pipe & Tube Supplier – C11000, C12200, C70600 from Shanghai

Copper Pipe & Tube Supplier – C11000, C12200, C70600 from Shanghai

Short answer: HXSCO supplies copper pipe and tube in C11000, C10200 and C12200 alongside copper-nickel C70600 and C71500, in annealed, half-hard or hard temper, drawn to tight OD and wall tolerance, and shipped with mill certificate and export-ready packing for plumbing, HVAC/R, marine and industrial buyers.

At a Glance

Copper Pipe & Tube Supplier – C11000, C12200, C70600 from Shanghai chart
Figure 1 – Copper Pipe & Tube Supplier – C11000, C12200, C70600 from Shanghai overview.

Our Copper Pipe & Tube Range

We draw and stock copper tube beside our Copper Supplier, Copper Wire Supplier und Copper-Nickel Supplier lines, and we size it against our Copper Tube Buyer’s Guide so buyers get the right grade for the service.

Grades, Temper and Tolerance

Plain copper tube is offered in C11000 (ETP), C10200 (OF) and C12200 (DHP); copper-nickel is offered in C70600 (90/10) and C71500 (70/30). Temper runs from annealed (O60/O61) through half-hard to hard-drawn. Outside diameter and wall are checked per our Metal Tolerances Fits Guide, and each lot is documented by our Mill Test Certificate Guide.

Surface, Cleaning and Packing

Tubes are supplied bright, cleaned and capped; copper-nickel is descaled and passivated where specified. Cleanliness and finish are handled per our Metal Degreasing Guide und Metal Surface Treatment Guide. Ends are capped or plugged and bundles are wrapped for moisture-safe export.

Anwendungen

C11000 and C12200 serve potable water, gas and HVAC/R; C10200 serves high-purity electronics; C70600 and C71500 serve seawater cooling, condensers and shipboard piping where corrosion resistance matters — see our Seawater Corrosion Guide und Copper Busbar Guide for related uses.

Get a Quote

Tell HXSCO your requirements and we will respond with a competitive quote and lead time.

Häufig gestellte Fragen

What copper grades do you stock for tube?

C11000 (ETP), C10200 (OF) and C12200 (DHP), plus copper-nickel C70600 and C71500.

Which temper is available?

Annealed (O60/O61), half-hard and hard-drawn, by application.

Do you supply copper-nickel tube?

Yes — C70600 (90/10) and C71500 (70/30) for marine and seawater service.

How is tube packed for export?

Capped ends, bundled and wrapped moisture-safe, with mill certificate.

Can you certify chemistry and wall?

Every lot ships with a mill test report confirming grade, temper and dimensions.

Source Copper Pipe & Tube from HXSCO

HXSCO supplies copper and copper-nickel tube in the grade, temper and wall your job needs. Send your specification and quantity for a quote.

Request a Quote

Dieser Eintrag wurde veröffentlicht am Blog. Setze ein Lesezeichen auf den permalink.