Short answer: Copper sheet is flat-rolled high-conductivity metal used for electrical, architectural, and craft applications. The most stocked grades are ETP C11000 for general use, oxygen-free C10100/C10200 for welding and electronics, and DHP C12200 for plumbing and heat exchangers. Thicknesses commonly run from 0.2 mm to 6 mm.
At a Glance
What Is Copper Sheet?
Copper sheet is produced by rolling cast billets through hot and cold mills to a flat, precise thickness. Its outstanding electrical and thermal conductivity, corrosion resistance, and workability make it a premium material for roofing, electrical parts, and decorative metalwork. Typical thicknesses run from 0.2 mm to about 6 mm before the material is classed as plate.
Common Copper Sheet Grades
The chart above summarizes the main grades. ETP C11000 (99.9% copper) is the general-purpose default with excellent conductivity. Oxygen-free C10100/C10200 are chosen for welding, brazing, and high-purity electronics where embrittlement must be avoided. DHP C12200 is the plumbing and heat-exchanger grade thanks to its phosphorus deoxidation. Brass sheet (C26000) serves decorative and ammunition uses.
Thickness and Temper
Copper sheet is supplied soft (annealed) or half-hard. Softer tempers form and deep-draw easily; half-hard sheet holds its shape for roofing and cladding. State the thickness, temper, and edge condition (sheared or slit) when you request a quote.
Tipik Uygulamalar
- Roofing & cladding: Weather-resistant, long-life architectural skins.
- Electrical: Switchgear parts, busbar backing, and conductive shims.
- Heat transfer: Heat-exchanger plates and solar absorbers.
- Craft & decorative: Jewelry, signage, and art where the natural patina is valued.
Buying Copper Sheet from HXSCO
When you request a quote, give the grade, thickness, width, length, temper, and quantity. HXSCO can shear, slit, and pack copper sheet for export. If you also need copper-alloy bar or rod, see our pirinç çubuk tedarikçileri page, or Bize ulaşın for a combined copper package.
Sıkça Sorulan Sorular
Use ETP C11000 for general electrical and architectural work, oxygen-free C10100/C10200 for welding and electronics, and DHP C12200 for plumbing and heat exchangers.
Common flat-rolled copper runs from about 0.2 mm to 6 mm; thicker material is usually supplied as plate.
Yes. Copper roofing lasts decades, resists corrosion, and develops a protective patina, making it a premium architectural choice.
ETP (C11000) is tough-pitch copper with tiny residual oxygen; oxygen-free (C10100/C10200) has almost none, which prevents hydrogen-embrittlement when welding or brazing.
Yes. Copper sheet cuts, shears, and forms readily. Annealed sheet deep-draws well, while half-hard sheet keeps its shape for cladding.
Ready to source copper or copper alloys?
Tell us the grade (C11000, C12200, brass, etc.), form, size, quantity, and destination. HXSCO will reply with a competitive quote, lead time, and mill-test options.
Request a QuoteWhy Buyers Source Copper & Copper Alloys from HXSCO
HXSCO supplies copper and copper-alloy long products and fabricated parts to manufacturers, electrical contractors, and trading companies worldwide. We stock ETP (C11000), oxygen-free (C10200), and DHP (C12200) copper plus brass and bronze alloys in sheet, plate, pipe, tube, bar, rod, and wire. Material can be supplied with mill-test certificates, precision cutting, and export packing. Contact HXSCO for a project-specific quote or grade recommendation.