Short answer: Powder coating electrostatically sprays a dry polymer onto steel or aluminum and bakes it into a thick, chip-resistant colored film, compared with other finishes in our Anodizing vs Powder Coating guide and arranged via our Metal Coating Supplier page.
At a Glance
What Powder Coating Is
A charged dry powder is sprayed onto grounded parts and cured in an oven into a continuous film, with the finishing overview in our Metal Surface Treatment Guide and the aluminum route in our Aluminum Supplier page.
Powder vs Liquid Paint
Powder gives thicker, more even and chip-resistant films with reclaimable overspray, versus thinner liquid coats, with the comparison in our Anodizing vs Powder Coating guide.
| Mülkiyet | Powder | Liquid paint |
|---|---|---|
| Film build | Thick even | Thin layers |
| Chip resist | Yüksek | Orta |
| Overspray | Reclaimed | Wasted |
| Cure | Heat oven | Air or bake |
Colors and Film Specs
Standard RAL colors and film builds of 60 to 120 microns are typical; specify gloss, color and salt-spray hours when you order.
Best Applications
Architectural frames, enclosures and machinery guards benefit most, with the material basis in our Stainless Steel Supplier page and our Aluminum Supplier page.
Quality and Certification
Film thickness and adhesion are checked per spec, with verification in our Quality Inspection Guide and the document detail in our Mill Test Certificate Guide.
Buyer Checklist
Define RAL color, film build and salt-spray hours; plan quantity and timing with our MOQ and Lead Time Guide and price with our Price Quotation Guide.
Get a Quote
Tell HXSCO your requirements and we will respond with a competitive quote and lead time.
Sıkça Sorulan Sorular
Steel and aluminum mainly.
Typically 60 to 120 microns.
Powder for thick, tough color.
Standard RAL plus customs.
Film thickness and adhesion.
Get Powder Coating with HXSCO
HXSCO arranges powder coating in your RAL color with film and adhesion reports. Send material, part size and spec for a quote.