
Short answer: To buy structural steel, pick the grade by load (S235 light, S275 general, S355 primary), choose the section by function (beam vs column vs bracing), and write a schedule with grade, dimensions and certificate requirement – the section detail is in our Steel Section Guide and the supply basis in our Structural Steel Supplier page.
At a Glance

What Structural Steel Grades Mean
S235, S275 and S355 are European structural grades defined by minimum yield strength; the parallel US grade is A36. The material basis is in our Carbon Steel Supplier and corrosion care in our Metal Surface Treatment Guide.
Choosing the Right Section
Beams take bending (use Wide-Flange Beam Guide e H-Beam Guide), columns take compression (see our Steel Column Guide), and bracing uses angles e channels.
How to Write a Specification
List section, grade, length, quantity, any holes or cope cuts, and the certificate level. The document detail is in our Mill Test Certificate Guide and the quality method in our Quality Inspection Guide.
Estimating Weight and Cost
Weight drives freight and price; estimate with our Steel Weight Calculator and price with our Price Quotation Guide.
Fabrication and Welding
Plan cuts, drillings and weld procedure early; the welding basis is in our Metal Welding Guide.
Where It Is Used
Typical duty spans construção, bridges e solar structures.
Get a Quote
Tell HXSCO your requirements and we will respond with a competitive quote and lead time.
Perguntas frequentes
S275 for general frames, S355 where weight saving matters.
EN 10204 type 3.1 for most structural projects.
Use section tables plus our steel weight calculator.
Yes – cut, drill and cope on request.
Yes, but mark them clearly on the schedule.
Get a Structural Steel Quote
HXSCO supplies S235 to S355 structural sections with mill certificates and cut service. Send your schedule for a competitive quote.
