Short answer: Cast iron is iron-carbon-silicon with 2–4 % carbon, poured into moulds for parts where stiffness, wear resistance, damping and low cost beat high tensile strength. Grey iron’s graphite flakes damp vibration (engine blocks, machine beds); ductile (spheroidal-graphite) iron adds toughness and ductility (pipe, crankshafts, auto); malleable and white irons cover fittings and wear parts. Grade choice balances machinability, strength and shock resistance.
At a Glance
Iron Types
Cast iron pairs with Investment Casting Vs Die Casting en Metal Grain Size Guide; relate to Metal Machinability Guide en Metal Wear Mechanisms Guide.
Kwaliteit
Microstructure and hardness checked per Metal Hardness Testing Methods, certified by Mill Test Certificate Guide. Inspect by Metal Ndt Guide.
Supply & QA
Protect castings via How To Prevent Metal Rust. HXSCO supplies cast-iron stock and components to spec.
Get a Quote
Tell HXSCO your requirements and we will respond with a competitive quote and lead time.
Veelgestelde vragen
Iron with 2-4% C + Si, poured for stiff/wear parts.
Grey damps vibration; ductile adds toughness/ductility.
Spheroidal-graphite (ductile) iron — tough and castable.
With preheat and nickel electrodes, yes — carefully.
HXSCO supplies grey/ductile iron stock and parts.
Source Cast Iron from HXSCO
HXSCO supplies grey and ductile cast iron stock and machined components to your grade and drawing. Send your requirement for a quote.