
Short answer: H-beam sections (HEA, HEB, IPE) are European I-shaped profiles with parallel flanges; HEA is light, HEB is heavy and suited to columns, and IPE is a narrow standard beam – the US parallel and selection logic are in our Wide-Flange Beam Guide and the supply basis in our Structural Steel Supplier page.
At a Glance

HEA, HEB and IPE Compared
HEA has the thinnest flanges (lightest), HEB is heavier for columns and primary members, and IPE is a compact standard beam; the structural overview is in our Steel Section Guide.
H-Beam vs Wide-Flange
Metric H-beams use HE/IPE designations while US wide-flange uses W-shapes; both have parallel flanges. See our Wide-Flange Beam Guide for the W system.
Using H-Beams as Columns
HEB sections are common columns; the design basis is in our Steel Column Guide.
Welding and Detailing
Weld with low-hydrogen electrodes; the welding basis is in our Metal Welding Guide.
Weight and Cost
Estimate with our Steel Weight Calculator and price with our Price Quotation Guide.
Quality and Certification
Each lot ships with EN 10204 type 3.1, verified by the method in our Quality Inspection Guide.
Get a Quote
Tell HXSCO your requirements and we will respond with a competitive quote and lead time.
Domande frequenti
HEA for light beams, HEB for columns and heavy members.
IPE is a narrow I-section, lighter than HEA.
EN 10204 type 3.1 per lot.
Yes – cut to length with holes on request.
Yes – bundled and documented for export.
Get an H-Beam Quote
HXSCO supplies HEA, HEB and IPE H-beams in S275 and S355 with mill certificates. Send profile and quantity for a quote.
