Short answer: Finishing is chosen against the job: anodising or powder coating for aluminium, galvanising or zinc for steel outdoors, paint or e-coat for appearance, and passivation or electropolish for stainless cleanability, each balancing corrosion, wear and look.
At a Glance
Aluminium Finishes
Anodising hardens and colours aluminium while powder coating adds a thick protective film; the choice is in our Anodized Aluminium Guide dan Anodizing vs Powder Coating, with the base alloy in our Aluminium Supplier range.
Steel Coatings
Galvanising and zinc protect steel outdoors, paint and e-coat drive appearance, and phosphating keys paint; compare in our Galvanized Grades, Paint vs Powder, Phosphating vs Galvanizing dan PPGI PPGL Guide.
Stainless Surface
Passivation and electropolish rebuild the passive film and clean the surface for food and pharma; the options are in our Finishing Options dan Passivation vs Pickling, and tie back to our Surface Treatment Guide.
Pickling and Prep
Pickling and degreasing prepare the surface before coating; our Degreasing Guide dan Steel Surface Treatment cover the shop steps for carbon and alloy steel.
Specifying a Finish
Buyers should specify environment, wear and appearance, then let the supplier propose the leanest qualified finish; our How to Choose a Metal Supplier helps frame the RFQ.
Get a Quote
Tell HXSCO your requirements and we will respond with a competitive quote and lead time.
Pertanyaan yang Sering Diajukan
Anodising for wear or powder coating for colour and thickness.
Galvanised for outdoor cost; paint or e-coat for appearance.
To rebuild the passive film for corrosion resistance and cleanability.
Keys paint to steel as a conversion coating base.
We supply the base metal with mill certificate; specify the finish you need.
Source Finished Metal from HXSCO
HXSCO supplies aluminium, steel and stainless ready for your specified finish, with mill certificate. Send your environment and appearance needs for a quote.