Gray Iron Guide: Flake Graphite, Grades and Applications

Gray Iron Guide: Flake Graphite, Grades and Applications

Short answer: Gray iron is cast iron with flake graphite that gives excellent vibration damping, thermal conductivity and machinability at low cost; the grade system is set out in our Cast Iron Guide and supply in our Cast Iron Supplier page.

At a Glance

Gray Iron Guide: Flake Graphite, Grades and Applications chart
Figure 1 – Gray Iron Guide: Flake Graphite, Grades and Applications overview.

Why Flake Graphite Matters

Flake graphite interrupts the matrix and dissipates vibration, making gray iron the default for machine bases and engine blocks; the other graphite forms are compared in our Cast Iron Guide.

EN-GJL and ASTM A48 Grades

Grades are named by minimum tensile strength; select by the part load and section thickness, with the specification method in our Choose a Supplier Guide.

Gray vs Ductile Iron

Gray damps better and machines easily, ductile is stronger and tougher; see our Ductile Iron Guide and the Cast Iron vs Steel Guide.

Machining and Surface Finish

Flakes break the chip and give a fine finish; surface options are covered in our Surface Treatment Guide.

Where Gray Iron Is Used

Machine tools, pumps, engine blocks and municipal castings; the casting route is in our Metal Casting Guide and quality in our Quality Inspection Guide.

Defects to Watch

Section sensitivity and chill can cause hard spots; see our Casting Defects Guide.

Get a Quote

Tell HXSCO your requirements and we will respond with a competitive quote and lead time.

Questions fréquemment posées

Why does gray iron damp vibration?

Flake graphite absorbs vibrational energy.

Which grade for a machine base?

EN-GJL-250 or ASTM A48 Class 30.

Is gray iron strong?

Good in compression, brittle in tension.

Can it be welded?

Possible with preheat and suitable filler.

Do you supply gray iron castings?

Yes – to grade and drawing.

Get a Gray Iron Quote

HXSCO supplies EN-GJL and ASTM A48 gray iron castings with certificates and machining. Send your grade and drawing for a quote.

Request a Quote

Cette entrée a été publiée dans Blog. Ajoutez un signet au permalink.