
Short answer: Gray iron is cast iron with flake graphite that gives excellent vibration damping, thermal conductivity and machinability at low cost; the grade system is set out in our Cast Iron Guide and supply in our Cast Iron Supplier page.
At a Glance

Why Flake Graphite Matters
Flake graphite interrupts the matrix and dissipates vibration, making gray iron the default for machine bases and engine blocks; the other graphite forms are compared in our Cast Iron Guide.
EN-GJL and ASTM A48 Grades
Grades are named by minimum tensile strength; select by the part load and section thickness, with the specification method in our Choose a Supplier Guide.
Gray vs Ductile Iron
Gray damps better and machines easily, ductile is stronger and tougher; see our Ductile Iron Guide and the Cast Iron vs Steel Guide.
Machining and Surface Finish
Flakes break the chip and give a fine finish; surface options are covered in our Surface Treatment Guide.
Where Gray Iron Is Used
Machine tools, pumps, engine blocks and municipal castings; the casting route is in our Metal Casting Guide and quality in our Quality Inspection Guide.
Defects to Watch
Section sensitivity and chill can cause hard spots; see our Casting Defects Guide.
Get a Quote
Tell HXSCO your requirements and we will respond with a competitive quote and lead time.
자주 묻는 질문
Flake graphite absorbs vibrational energy.
EN-GJL-250 or ASTM A48 Class 30.
Good in compression, brittle in tension.
Possible with preheat and suitable filler.
Yes – to grade and drawing.
Get a Gray Iron Quote
HXSCO supplies EN-GJL and ASTM A48 gray iron castings with certificates and machining. Send your grade and drawing for a quote.
