Short answer: HXSCO supplies stainless steel sheet in the principal corrosion- and heat-resistant grades — 304/304L and 316/316L for kitchen, architectural and marine service, 321 for stabilised high-temperature exhaust, 430 for decorative and automotive trim, and 310S for furnace parts — in 0.3–6 mm thickness with 2B, BA, No.4 or hairline finish, sheared or laser-cut to size and certified to ASTM A240 / EN 10088 with full mill documentation.
At a Glance
Our Stainless Sheet Range
We stock sheet beside our Stainless Steel Supplier, Stainless Steel Coil Supplier, Stainless Steel Plate Supplier, Stainless Steel Bar Supplier ve Stainless Steel Pipe Supplier lines; see Paslanmaz Çelik Sınıfları Açıklandı ve Stainless Steel Surface Finishes for selection guidance.
Quality & Supply
Grade, chemistry and mechanicals are documented per Mill Test Certificate Guide and verified by Metal Ndt Guide; relate to Stainless Steel 304 Properties ve Stainless Steel 316 Properties.
Uygulamalar
Sheet is cut via Metal Waterjet Cutting Guide ve Metal Thermal Cutting Guide, finished through Metal Surface Treatment Guide and protected by How To Prevent Metal Rust.
Get a Quote
Tell HXSCO your requirements and we will respond with a competitive quote and lead time.
Sıkça Sorulan Sorular
304/304L, 316/316L, 321, 430 and 310S stainless sheet.
From 0.3 mm to 6 mm in annealed or hard condition.
2B, BA (bright annealed), No.4 and hairline.
Every coil/sheet ships with a mill test report (ASTM A240 / EN 10088).
Yes — sheared, laser or waterjet cut with edge prep.
Source Stainless Sheet from HXSCO
HXSCO supplies 304, 316, 321 and 430 stainless steel sheet with 2B/BA/No.4 finish, cut to size with mill certificate. Send your grade, gauge and cut plan for a quote.