Short answer: Clinching joins two or more sheet-metal layers by pressing them into a die so the lower sheet flows plastically and interlocks with the upper sheet — forming a mechanical button without any rivet, screw, filler or heat. It is a fast, low-cost, clean joining method for coated and dissimilar sheets (steel-to-aluminium, pre-painted, galvanised) where spot welding would burn the coating or where riveting would need a hole and a secondary operation.
At a Glance
Clinching vs Other Joining
Clinching compares with Metal Riveting Guide, Metal Adhesive Bonding Guide ve Metal Resistance Welding Guide; relate to Metal Stamping Vs Machining.
Kalite
Button and neck checked by Metal Ndt Guide, documented per Mill Test Certificate Guide. Relate to Surface Roughness Ra Guide.
Supply & QA
Start from Galvanized Sheet Guide ve Metal Degreasing Guide; HXSCO supplies clinch-ready sheet.
Get a Quote
Tell HXSCO your requirements and we will respond with a competitive quote and lead time.
Sıkça Sorulan Sorular
Pressure-formed mechanical interlock, no fastener or heat.
Clinching needs no hole or rivet; faster, cleaner.
Steel, galvanised, aluminium and pre-painted sheets.
Not inherently — pair with sealant for a sealed joint.
HXSCO supplies coated and bare sheet suited to clinching.
Source Clinch-Ready Sheet from HXSCO
HXSCO supplies steel, galvanised and aluminium sheet suited to clinching and mechanical joining. Send your gauge and alloy for a quote.