Titanium Sheet Supplier – Grade 1/2/5/7/12 Sheet from Shanghai

HXSCO supplies titanium sheet in Grades 1, 2, 5, 7 and 12 — combining corrosion...

Waterjet Cutting Guide: Abrasive Jet Cutting of Metal Without Heat

Waterjet cutting fires a thin stream of water mixed with abrasive garnet at pressures above...

Tribology Guide: Friction, Wear & Lubrication of Metals

Tribology is the study of friction, wear and lubrication between sliding metal surfaces; lowering friction...

Stress Rupture Guide: Creep Failure & Larson-Miller for High Temp

Stress rupture is the time-dependent fracture of a metal under constant load at elevated temperature...

Metal Pickling Guide: Acid Descaling & Surface Prep for Steel & Stainless

Pickling is an acid treatment that dissolves oxide scale, rust and weld heat-tint from metal...

Hydrogen-Induced Cracking (HIC) Guide: Sulfide Stress & Stepwise Cracking

Hydrogen-induced cracking (HIC) is the stepwise blistering that forms inside pipeline and pressure-vessel steels when...

Heat Exchanger Materials Guide: Tube, Shell & Plate Selection

Heat-exchanger material choice balances thermal conductivity, corrosion resistance and cost: titanium and copper-nickel rule seawater...

Bolt Fastening Guide: Torque, Preload & Tension for Reliable Joints

Bolted joints carry load through clamping force, not bolt tension; the torque you apply is...

Austempering Guide: Bainite, Strength & Toughness for Steel & Ductile Iron

Austempering is a heat-treatment that quenches steel or ductile iron from the austenitising temperature into...

Aluminium Rod Supplier – 1050, 2024, 6061 & 7075 Rod from Shanghai

HXSCO supplies aluminium rod in 1050, 2024, 6061, 7075 and 6082 across tempers — drawn...