Short answer: Powder coating electrostatically sprays a dry polymer onto clean metal and bakes it into a uniform, thick, chip-resistant film — tougher and greener than liquid paint, and a staple of corrosion protection.
At a Glance
Dry Film Process
A charged gun sprays polymer powder that clings to the earthed part, then a bake melts it into a continuous film; compare with Anodizing Vs Powder Coating en Anodizing Vs Electroplating, and with Thermal Spray Coating Guide. Control DFT via Metal Coating Thickness Guide.
Avoiding Defects
Prep decides adhesion — degrease (Metal Degreasing Guide) and blast to profile; read flaws in Coating Defects Guide; the film is part of Metal Surface Treatment Guide. Add Metal Corrosion Inhibitor Guide primer for harsh duty.
QA & Supply
Measure film and holiday-test by Metal Ndt Guide, protect per How To Prevent Metal Rust, and document per Mill Test Certificate Guide. HXSCO supplies coat-ready stock.
Get a Quote
Tell HXSCO your requirements and we will respond with a competitive quote and lead time.
Veelgestelde vragen
Electrostatically applied dry polymer baked into a uniform, durable film.
The baked film is thick, continuous and chip-resistant versus thin liquid paint.
For corrosion and wear it usually is, with less solvent and waste.
Any conductive, oven-tolerant metal — steel, aluminium, galvanised.
HXSCO supplies degreased, blasted and coat-ready stock with DFT documented.
Source Coat-Ready Metal from HXSCO
HXSCO supplies degreased, blasted and coat-ready metal with surface quality documented. Send your spec and quantity for a quote.