Short answer: Residual stress is locked-in strain from machining, welding, grinding or heat treatment — usually tensile and harmful near surfaces, causing distortion and crack growth — and is relieved by stress-relief annealing, tempering or, for fatigue life, converted to helpful compressive stress by shot peening.
At a Glance
Where Residual Stress Comes From
Any process that heats, cools or cuts unevenly leaves locked-in stress. Welding deposits tensile stress and distortion; machining leaves a tensile skin that can crack; grinding can burn the surface; quenching creates martensitic stress. The heat-treatment background is in Metal Heat Treatment Guide dan Stress Relieving Vs Annealing.
Measuring & Relieving
Stress is measured by X-ray diffraction, hole-drilling or sectioning. Relief comes from stress-relief annealing (or PWHT after weld), tempering after hardening, and balanced cooling. Shot peening deliberately adds a compressive skin for fatigue — the process in Shot Peening Guide — which couples with the fatigue limits in Metal Fatigue Endurance Limit.
Design & Quality
Control residual stress to avoid distortion and stress-corrosion; the SCC risk is in Stress Corrosion Cracking dan Metal Corrosion Fatigue Guide. We anneal or temper parts per Annealing Vs Normalizing and can document relief cycles on the mill cert per Mill Test Certificate Guide.
Get a Quote
Tell HXSCO your requirements and we will respond with a competitive quote and lead time.
Pertanyaan yang Sering Diajukan
Uneven heating, cooling or cutting — welding, machining, grinding and quenching all leave locked-in stress, usually tensile and harmful near surfaces.
Commonly by X-ray diffraction, the hole-drilling (ring-core) method, or sectioning and strain release; each suits different accuracy and part size.
Stress-relief annealing (or PWHT after welding), tempering after hardening, and balanced cooling; vibrating stress relief is used for large welds.
Not always — shot peening adds a compressive surface skin that improves fatigue life, deliberately used on springs and turbine parts.
Yes. HXSCO supplies machined and welded parts with stress-relief or temper cycles documented on request; tell us your specification.
Source Stress-Relieved Parts from HXSCO
HXSCO supplies machined and welded parts with documented stress-relief or temper cycles. Send your specification, grade and quantity for a quote.