Short answer: Choose metal additive manufacturing for complex, low-volume parts and CNC machining for tight-tolerance, high-volume work, with the printing service in our Metal 3D Printing Supplier page and the design rules in our Design for AM Guide.
At a Glance
Two Ways to Make Metal Parts
AM adds material for complex shapes; CNC removes material for precision and speed at volume, with the overview in our 3D Metal Printing Guide.
Side-by-Side
AM leads on complexity and material use; CNC leads on tolerance and high volume, with the powder basis in our Metal Powder for AM Guide.
| Faktor | AM wins | CNC wins |
|---|---|---|
| Complexity | Internal features | Tight tolerance |
| Volume | Low to mid | Tinggi |
| Material use | Near zero waste | Some waste |
Hybrid Approach
Many jobs print the near-net shape and finish critical faces by CNC, with the post steps in our AM Post-Processing Guide.
Cost Drivers
AM cost is set by build time and volume; CNC by cycle time and setup, with pricing in our Price Quotation Guide.
Quality and Inspection
Both are verified to spec, with AM detail in our AM Quality Inspection Guide and general verification in our Quality Inspection Guide.
Buyer Checklist
State volume, tolerance and geometry; plan quantity and timing with our MOQ and Lead Time Guide and price with our Price Quotation Guide.
Get a Quote
Tell HXSCO your requirements and we will respond with a competitive quote and lead time.
Pertanyaan yang Sering Diajukan
AM – internal features.
CNC – faster cycles.
CNC – tighter.
Yes – print then CNC finish.
Depends on volume and geometry.
Choose AM or CNC with HXSCO
HXSCO advises AM vs CNC for your part and delivers either process with inspection reports. Send file, volume and tolerance for a quote.