Short answer: AM powders are spherical, gas-atomized metals with a tight size band and good flow, supplied via our AM Metal Powder Supplier page and used by the printing service in our Metal 3D Printing Supplier page.
At a Glance
What Makes Good AM Powder
Spherical shape, low oxygen and a narrow size distribution keep layer deposition smooth and dense, with the supply route in our AM Metal Powder Supplier page.
Size Bands by Process
Fine bands suit powder-bed lasers, coarser bands suit binder jet and DED, with the process detail in our SLM/DMLS Guide and our Binder Jetting Guide.
| Size band | Process | Note |
|---|---|---|
| 15 to 45 um | SLM / DMLS | Fine detail |
| 20 to 63 um | Binder jet | Flow speed |
| 53 to 150 um | DED | Large parts |
Quality Tests
Lots are checked for particle-size distribution, apparent density, Hall flow and oxygen, with verification in our Quality Inspection Guide and the document detail in our Mill Test Certificate Guide.
Choosing Powder
Match the band to your machine and the alloy to the part duty, with the design link in our Design for AM Guide.
Buyer Checklist
State alloy, size band and weight; plan quantity and timing with our MOQ and Lead Time Guide and price with our Price Quotation Guide.
Get a Quote
Tell HXSCO your requirements and we will respond with a competitive quote and lead time.
Pertanyaan yang Sering Diajukan
Flows and packs for dense layers.
Usually 15 to 45 microns.
Size, density, flow, oxygen.
Yes – blended with virgin within limits.
Yes – batch certificate per lot.
Source AM Powder with HXSCO
HXSCO supplies gas-atomized AM powders with size, flow and oxygen reports. Send alloy, size band and weight for a quote.