Short answer: Aluminum die casting injects molten aluminium into a steel die for high-volume, thin-walled, dimensionally tight components — using A380, A383, A360 or ADC12 — for automotive, electronics and hardware where unit cost and repeatability dominate.
At a Glance
The Die Casting Route
Die casting delivers aluminium into a precision steel die under high pressure, yielding thin walls, tight tolerances and excellent repeatability at volume — our Casting Supplier programme, distinct from Aluminum Extrusion Supplier dan Metal Injection Molding Guide. It beats sand casting on speed and finish and competes with Metal Stamping Vs Machining for complex shapes.
Alloys and Properties
A380 is the general workhorse; A383 fills thin, complex sections; A360 and A413 give better corrosion resistance and pressure tightness for valve and pump bodies; ADC12 is the common JIS grade. These compare with Aluminum 6061 Properties dan 7075 Vs 6061 Aluminum wrought alloys — die-cast grades trade some strength for castability. Strength context in Yield Strength Vs Tensile Strength; corrosion in Galvanic Corrosion Guide.
Applications & Quality
Die-cast aluminium makes transmission cases, brackets, housings, heatsinks and hardware at scale. Porosity control and leak testing matter for pressure parts; finishing in Anodized Aluminum Guide dan Metal Surface Treatment Guide. HXSCO supplies die-cast aluminium parts and the base Aluminum Supplier stock with certificates per Mill Test Certificate Guide.
Get a Quote
Tell HXSCO your requirements and we will respond with a competitive quote and lead time.
Pertanyaan yang Sering Diajukan
Aluminum die casting forces molten aluminium into a steel die under pressure to make thin-walled, tight-tolerance, high-volume parts like housings and brackets.
A380 is the general grade; A383 for thin complex walls; A360 and A413 for corrosion and pressure tightness; ADC12 is the common JIS grade.
At high volume, yes — die casting amortises tooling over many parts and needs little finishing, beating machining on unit cost for complex shapes.
Yes. HXSCO supplies aluminum die castings in A380, A383, A360 and ADC12 with machining, finishing and mill certificates.
Die Cast Aluminum with HXSCO
HXSCO supplies aluminum die castings in A380, A383, A360 and ADC12 with machining and finishing. Send your drawing and volume for a quote.