Steel vs Stainless Steel: When to Choose Which Material

Plain carbon steel is cheaper and, when coated, very strong, but it rusts without protection....

Stainless Steel Pipe & Tube Supplier – 304, 316, Duplex Seamless & Welded

HXSCO supplies stainless steel pipe and tube in 304/304L, 316/316L and duplex 2205 — seamless...

Stainless Steel Grades Explained: 304, 316, 430 & More

Stainless grades are grouped by microstructure — austenitic (304/316), ferritic (430), martensitic (410) and duplex...

Pitting Corrosion in Stainless Steel: Causes, PREN & Prevention

Pitting is localised attack that starts in stagnant chloride environments and punches small, deep holes...

Metal Stamping vs Machining: Process Selection Guide

Stamping forms sheet metal at very low unit cost once tooling exists, making it ideal...

Low-Carbon vs High-Carbon Steel: Carbon Content & Properties

Low-carbon steel (≤0.25% C) is soft, formable and easy to weld — ideal for structural...

How to Clean Stainless Steel: Passivation, Care & Maintenance

Clean stainless with mild soap and water, avoid chloride cleaners, rinse and dry, and re-passivate...

Fasteners Supplier – Bolts, Nuts, Washers, Screws & Anchors

HXSCO supplies bolts, nuts, washers, threaded rod, anchors and self-tapping screws in stainless (A2/A4) and...

Duplex Stainless Steel Guide: 2205, 2507 & Lean Duplex Explained

Duplex stainless steels have a roughly 50/50 austenite-ferrite structure that gives about twice the yield...

ASTM A36 vs A572 Steel: Carbon Structural Grades Compared

A36 is the baseline mild-carbon structural steel (~250 MPa yield) used for general fabrication. A572...