Short answer: HXSCO supplies thin-gauge metal foil — aluminium, copper, stainless 304/316, nickel and tin/lead — from 0.01 mm up, for packaging, battery, EMI shielding, gaskets and filtration, rolled to tight gauge and temper.
At a Glance
Foils We Supply
We stock aluminium (1100/8011) for packaging and heat-exchanger fins, copper C11000 for EMI shielding and battery tab, stainless 304/316 for gaskets and filters, nickel 200 for battery and chemical duty, and tin/lead for solder and shield. The copper line ties to Copper Supplier et Copper Sheet Guide; nickel to Nickel Alloy Supplier.
Gauge, Temper & Flatness
Foil is rolled to tight gauge (± a few percent) in O, H or full-hard temper, with clean degreased surfaces for bonding and coating per Metal Surface Treatment Guide. Aluminium temper codes are in Aluminum Temper Designations and the alloy range in Aluminum Alloy Series Guide.
Applications & Quality
Foil serves flexible packaging, capacitor and battery tab, EMI/RFI shields, gaskets, mesh and laboratory use. Every lot ships with gauge, temper and chemistry checks and mill documentation per Mill Test Certificate Guide, packed to avoid creasing.
Get a Quote
Tell HXSCO your requirements and we will respond with a competitive quote and lead time.
Questions fréquemment posées
HXSCO supplies aluminium, copper, stainless 304/316, nickel 200 and tin/lead foil from about 0.01 mm up.
Packaging, battery and capacitor tab, EMI/RFI shielding, gaskets, filtration mesh and laboratory work where thin, formable metal is needed.
Aluminium foil starts around 0.01 mm; copper and stainless around 0.03 mm, rolled to tight gauge and temper.
Yes. Every foil lot ships with gauge, temper and chemistry checks and EN 10204 documentation on request.
Source Metal Foil from HXSCO
HXSCO supplies aluminium, copper, stainless, nickel and tin/lead foil from 0.01 mm up with tight gauge and temper. Send your material, gauge and quantity for a quote.