Thread Cutting Guide: Turning, Tapping & Milling vs Thread Rolling

Threads are cut by single-point turning, tapping (internal), die (external) or CNC milling — removing...

Swaging Guide: Rotary & Axial Forming for Tapered Tubes and Reduced Rods

Swaging forms tube and rod by hammering or rotating dies that close around the part...

Shear Cutting Guide: Shearing, Slitting & Blanking Sheet & Coil

Shear cutting parts sheet and coil with a straight or shaped blade and no chips...

Metal Grinding Guide: Surface, Cylindrical & Centerless Precision Finishing

Grinding uses a rotating abrasive wheel to remove a fine, controlled layer for a precise...

Gear Manufacturing Guide: Hobbing, Shaping, Broaching & Grinding Explained

Gears are made by cutting teeth into a blank — hobbing for spur and helical...

Coining Guide: Net-Shape Closed-Die Forging for Sharp, Repeatable Features

Coining is a closed-die forging variant that squeezes a heated or cold billet between matched...

CNC Turning Guide: Precision Cylindrical Machining for Shafts & Components

CNC turning spins a workpiece against a stationary cutting tool to remove material and form...

Clad Plate Supplier – Explosion & Roll-Bonded Bimetal Plate from Shanghai

HXSCO supplies explosion-bonded and roll-bonded clad plate — a thin corrosion-resistant or conductive layer metallurgically...

Band Saw Cutting Guide: Band, Circular & Abrasive Sawing of Bar and Tube

Sawing parts bar and tube with a toothed or abrasive blade — band saws for...

Galvalume Supplier – 55% Al-Zn (AZ150) Coated Steel Coil & Sheet from Shanghai

HXSCO supplies Galvalume — steel coated with a 55% aluminium, 43.5% zinc and 1.5% silicon...