Hot-Chamber Die Casting Guide: Process, Alloys and Advantages

Hot-Chamber Die Casting Guide: Process, Alloys and Advantages

Short answer: Hot-chamber die casting keeps the metal molten in a bath and pumps each shot through an immersed gooseneck into the die, giving very fast cycles for low-melting zinc and magnesium alloys; the process family is in our Die Casting Guide.

At a Glance

Hot-Chamber Die Casting Guide: Process, Alloys and Advantages chart
Figure 1 – Hot-Chamber Die Casting Guide: Process, Alloys and Advantages overview.

How the Hot-Chamber Works

The gooseneck is immersed in molten metal; a piston pushes a measured shot into the die, then the die opens and the part is ejected; the overall context is in our Die Casting Guide.

Alloys for Hot-Chamber

Zinc Zamak and ZA alloys are the classic choice, with some magnesium grades; see our Alloys Guide и Zinc Guide.

Преимущества

Fast cycle times, simple feeding and good surface finish make the process economical for high-volume small parts; compare with the Cold-Chamber Guide.

Limitations

The immersed mechanism limits use to alloys that will not attack the gooseneck and melt at moderate temperatures; aluminum is generally excluded.

Типовые применения

Zinc hardware, connectors, housings, toys and fittings; the tooling basis is in our Mold Design Guide.

Quality and Finishing

Check properties per our Inspection Guide and finish per our Finishing Guide.

Get a Quote

Tell HXSCO your requirements and we will respond with a competitive quote and lead time.

Часто задаваемые вопросы

What metals suit hot chamber?

Zinc and some magnesium alloys.

Why is it fast?

The gooseneck draws directly from the molten bath.

Can it cast aluminum?

Generally no – aluminum needs cold chamber.

What parts are common?

Zinc hardware, housings and connectors.

Do you supply hot-chamber castings?

Yes – see our die casting supplier page.

Get a Hot-Chamber Quote

HXSCO supplies zinc and magnesium hot-chamber die castings with tooling, finishing and certificates. Send your drawing and volume for a quote.

Request a Quote