Short answer: Formability is how far a metal can be stamped, drawn or bent without cracking; it is governed by strain hardening (n-value), plastic anisotropy (r-value), ductility and temper, so the right alloy and temper decide whether a part draws cleanly or splits at the corner.
At a Glance
What Drives Formability
The strain-hardening exponent (n) spreads strain and resists local thinning; the normal anisotropy (r) resists earing and splitting in deep drawing. These sit with ductility and Yield Strength Vs Tensile Strength, and are set by Cold Rolling Vs Hot Rolling и Aluminum Temper Designations. Base stock comes from our Aluminum Supplier и Metal Surface Treatment Guide lines.
Forming Processes
Stamping and drawing use high-r low-carbon steel and 3003-O aluminium; bending and roll-forming use Metal Stamping Supplier, Aluminum Extrusion Supplier и Metal Bending Guide; forging and casting cover the thick and complex shapes via Forging Supplier и Casting Supplier. Avoid over-forming brittle alloys — see Metal Brittle Fracture Guide.
Quality & Tolerances
Verify with Mill Test Certificate Guide, surface finish per Surface Roughness Ra Guide и Metal Tolerances Fits Guide, and confirm soundness with Metal Ndt Guide. Good lubrication and tool condition are as important as the metal itself.
Get a Quote
Tell HXSCO your requirements and we will respond with a competitive quote and lead time.
Часто задаваемые вопросы
A metal’s ability to be stamped, drawn, bent or stretched into shape without cracking or excessive springback — set by ductility, n-value and r-value.
Low-carbon steel and soft aluminium (e.g. 3003-O) and copper strip draw and bend very well; work-hardened tempers and high-strength steels need more care.
n-value (strain-hardening exponent) measures how strain spreads; r-value (plastic anisotropy) measures resistance to thinning in drawing — both raise formability.
Its high strength and work hardening give noticeable elastic recovery after forming, so tooling must over-bend or coin to hold the shape.
HXSCO supplies drawing- and bending-grade aluminium, steel and copper with temper and properties documented per your process.
Source Forming-Grade Metal from HXSCO
HXSCO supplies drawing- and bending-grade aluminium, steel and copper with documented temper and properties. Send your process, gauge and quantity for a quote.