Short answer: HXSCO supplies tool and die steel — D2, H13, P20, O1, A2 and M2 — in plate, flat and round bar, annealed or pre-hardened, cut and ground to your die drawing with hardness and mill certificates.
At a Glance
Tool Steels We Supply
Tool steel is high-carbon, high-alloy steel built to hold an edge, resist wear and survive repeated shock at hardness levels ordinary Carbon Steel Supplier 그리고 Alloy Steel Supplier grades cannot reach. We stock the four working families:
- Cold-work (D2, A2, O1) — blanking, forming and trim dies, punches and shear blades. The D2/H13 trade-off is covered in H13 Vs D2 Tool Steel.
- Hot-work (H13, H11) — die casting, forging and extrusion dies that see molten metal and thermal cycling; see Metal Extrusion Guide 그리고 Aluminum Die Casting Guide.
- Mould steel (P20, 718, 2738) — pre-hardened 28–34 HRC plate for plastic injection moulds, polishable to a mirror finish.
- High-speed steel (M2, M35) — drills, end mills, taps and form tools that stay hard at cutting temperature.
Sizes, Condition & Processing
We ship tool steel as plate (6–300 mm), flat bar, square and round bar (Ø10–500 mm), annealed (≈220 HB, machinable) or pre-hardened, plus finished blanks. We saw-cut, mill six faces, grind to size and heat-treat in vacuum to your target hardness — the quench and temper choices are laid out in Metal Heat Treatment Guide 그리고 Quenching Media Guide, and hardness is reported per Metal Hardness Testing Methods with conversions in Hardness Conversion Chart. Nitriding for extra die life follows Nitriding Vs Carburizing.
Machining annealed tool steel is slow and abrasive — plan feeds using Metal Machinability Guide, and specify die surfaces with Surface Roughness Ra Guide so polish and EDM finish expectations are unambiguous.
Applications & Quality
Our tool steel goes into stamping and blanking dies (see Metal Stamping Supplier), die-casting and extrusion tooling, plastic injection moulds, shear blades, punches, gauges and wear parts. Where wear beats every other requirement we also supply Wear Resistant Steel Supplier plate and Metal Hardfacing Guide overlay.
Every lot ships with an EN 10204 mill test certificate per Mill Test Certificate Guide, chemistry and hardness report, ultrasonic soundness on request per Metal Ndt Guide, and export-ready oiled and crated packing.
Get a Quote
Tell HXSCO your requirements and we will respond with a competitive quote and lead time.
자주 묻는 질문
HXSCO supplies cold-work (D2, A2, O1), hot-work (H13, H11), pre-hardened mould steel (P20, 718, 2738) and high-speed steel (M2, M35) in plate, flat and round bar.
D2 is a cold-work steel with high chromium for wear resistance in blanking and forming dies; H13 is a hot-work Cr-Mo-V steel with far better thermal-shock and heat resistance for die casting and extrusion.
Yes. P20 / 1.2311 and 718 mould plate ship pre-hardened at roughly 28–34 HRC, ready to machine and polish without further heat treatment.
Yes. We vacuum harden and temper to your target hardness, then grind to finished dimensions, and report hardness with the mill certificate.
Yes. Every lot ships with an EN 10204 mill test certificate covering chemistry and hardness, plus ultrasonic testing on request.
Source Tool & Die Steel from HXSCO
HXSCO supplies D2, H13, P20, O1, A2 and M2 tool steel in plate and bar — annealed, pre-hardened or ground to size with hardness certificates. Send your grade, sizes and quantity for a quote.