Short answer: 7075 aluminum is the strongest common aluminum alloy with a T6 tensile strength near 570 MPa at a density of only 2.81 grams per cubic centimetre, so it leads where strength and weight matter most in aerospace frames, fittings and sporting goods, with lower corrosion resistance than 6061 handled by cladding and coating, supplied as certified plate, bar and extrusion.
At a Glance
What 7075 Is
7075 leads on strength among aluminums, with the basis in our Aluminum Supplier and the comparison in our 6061 vs 7075 Guide; the strength basis is in our Metal Strength Comparison and density notes in our Density Comparison Guide.
Properties and Use
7075 serves airframe and high-load parts, with the aerospace context in our Aerospace Guide and corrosion notes in our Corrosion Resistance Guide; the coating context is in our Finishing Coating Guide.
Fabrication and Finish
7075 machines well and is often anodized or clad, with machining in our Machining Guide and finish in our Surface Treatment Guide 그리고 Passivation Guide.
Quality and Sourcing
Aluminum is checked by inspection, with methods in our Quality Inspection Guide; buyers confirm temper via our Mill Test Certificate Guide and pack per our Export Packing Guide.
Get a Quote
Tell HXSCO your requirements and we will respond with a competitive quote and lead time.
자주 묻는 질문
The strongest common aluminum alloy, Zn-Mg-Cu.
T6 tensile near 570 MPa, very light.
Yes – often clad or coated to protect it.
Aerospace frames, fittings and sporting goods.
Confirm temper and certificate, then pack for export.
Specify 7075 Aluminum with HXSCO
HXSCO supplies 7075 plate, bar and extrusion in T6 and T73 tempers with mill certificate. Send size and temper for a quote.