
Short answer: A steel section guide helps you read designation, weight (kg/m), moment of inertia (I) and section modulus (W) so you can match a profile to load and span; the product supply is in our Structural Steel Supplier page and the beam detail in our Wide-Flange Beam Guide.
At a Glance

Reading a Section Designation
Metric sections read as profile plus height and weight (for example IPE 300, HEB 240); US beams use the W-system in our Wide-Flange Beam Guide.
The Properties That Matter
Weight sets cost and handling; moment of inertia (I) sets bending stiffness; section modulus (W) sets bending strength. See our H-Beam Guide for profile comparison.
Beams, Columns, Channels, Angles
Each family is covered in its own guide: beams, columns, channels dan angles.
Choosing by Load and Span
Match I and W to your moment and span; the overview is in our Structural Steel Buyers Guide.
Weight and Cost
Estimate with our Steel Weight Calculator and price with our Price Quotation Guide.
Quality and Certification
Sections ship with EN 10204 type 3.1, verified by the method in our Quality Inspection Guide.
Get a Quote
Tell HXSCO your requirements and we will respond with a competitive quote and lead time.
Pertanyaan yang Sering Diajukan
An I-section about 300 mm deep.
A measure of bending strength.
By load, span and the I/W values.
Yes – EN and ASTM systems.
Yes – see our structural steel supplier page.
Get a Section Quote
HXSCO supplies the full range of structural sections with mill certificates and cut service. Send your schedule for a quote.
