Steel Sections Guide: I-Beam, H-Beam, Channel, Angle & Box

Steel sections — I-beam, H-beam, channel, angle and box (SHS/RHS) — are rolled long products...

Stainless Steel Wire Guide: Grades, Tempers & Applications

Stainless steel wire is drawn from 300- and 400-series rod into soft, spring or hard...

Silver Supplier – Fine, Sterling & Industrial Silver from Shanghai

HXSCO supplies silver as fine and sterling bullion, electrical contact strip and wire, conductive paste...

Quenching Media Guide: Oil, Water, Polymer & Salt Baths

Quenching media control how fast a hot steel part cools to lock in hardness —...

Metal Etching Guide: Chemical Etching of Steel, Stainless & Copper

Metal etching dissolves a controlled layer with acid through a mask — chemical (wet) etching...

Corrosion Fatigue in Metals: Mechanism, Alloys & Prevention

Corrosion fatigue is the combined attack of a cyclic load and a corrosive environment, which...

Investment Casting vs Die Casting: Process & Selection Compared

Investment (lost-wax) casting makes fine, complex steel and stainless parts in low-to-medium volume with no...

Copper Sheet & Plate Guide: C11000, C12200 & Applications

Copper sheet and plate come mainly as C11000 (ETP, 99.9% copper) for conductivity and architecture,...

Cobalt Alloy Supplier – Stellite, Haynes & Wear-Resistant Alloys from Shanghai

HXSCO supplies cobalt-based alloys — Stellite wear-resistant hardfacings, Haynes high-temperature grades and CoCrMo biomedical alloy...

Aluminum Die Casting Guide: Alloys, Process & Tolerances

Aluminum die casting injects molten aluminium into a steel die for high-volume, thin-walled, dimensionally tight...